The Snyder Industries 4100 Gallon Vertical Liquid Storage Tank is a white polyethylene bulk vessel built for high-volume water and liquid storage where a large, stable footprint matters. It's a 102-inch (8.5 ft) diameter cylinder standing 130 inches (about 10.8 ft) tall, so you get serious capacity without the sprawl of a low-profile design. Rated to 1.9 specific gravity, this Snyder vertical storage tank carries far more than plain water, so it comfortably covers dense process liquids, irrigation supply, and fire-reserve water duty rather than running at the edge of its rating.
Will it work for your site?
Full of water this tank holds roughly 34,194 pounds of contents. Because it is rated for liquids up to 1.9 specific gravity, its design load ceiling is about 64,969 pounds — which means at plain-water service it runs well under what the shell is rated to carry. That is the practical difference between a tank sized to just barely pass and one you standardize on and stop thinking about. Before you order, confirm your pad: a vessel this size needs a full, flat, continuously supported foundation under the entire 102 x 102 inch footprint, since a partially supported base is the most common install mistake on large verticals. Our concrete pad sizing guide walks through the ACI framework for above-ground poly tanks, and the Tank Sizing Calculator and Tank Sizing Guide help you confirm 4,100 gallons matches your draw and refill cycle. On a tall vertical like this, long-term wall performance is driven by the vapor-saturated headspace above the liquid line — our HDPE wall thickness guide explains the ASTM D1998 sizing logic operators should understand.
Fittings and configuration
Fitting layout should be matched to your plumbing before the tank leaves the plant. Call our team at 866-418-1777 to confirm the outlet and fitting arrangement for your application. Because this is a genuine Snyder vertical storage tank, the build is consistent and repeatable across units, which matters when you are standardizing a multi-tank installation. If this vessel is part of a grey-water, rainwater, or condensate reuse train for process or irrigation supply, our industrial water reuse topology guide covers quality-banded storage trains and staging.
Freight from the plant
This tank ships by LTL freight from the Snyder plant in Philippi, West Virginia, quoted live to your ZIP code. A 130-inch-tall vertical vessel is an oversized, low-density load, so freight is always quoted per destination rather than baked into the list price. Run your ZIP through the Freight Cost Estimator for a real number, or call 866-418-1777 and we will handle the quote and delivery details with you. If this vessel anchors a rural fire-water reserve, our fire-water reservoir design guide covers NFPA 22 sizing and cold-climate freeze protection for large white vertical storage tanks like this one.
