The Snyder Industries 4100 Gallon Vertical Storage Tank is a polyethylene vertical storage tank built for high-volume bulk water storage, where a large, stable footprint and a heavy specific-gravity rating both matter. This tank carries a 1.5 specific gravity rating, which means the wall is engineered to hold contents up to 1.5 times the density of water, giving you real headroom over plain water service. If you have been searching for a vertical storage tank in the 4,000-gallon range, this is a full-size Snyder vertical tank sized to stand on its own for bulk water storage without a secondary support structure.
Will it work for your site?
At capacity this tank holds roughly 4,100 gallons, which is about 34,194 pounds of water when completely full. Because it is rated to 1.5 specific gravity, the maximum rated contents weight climbs to about 51,291 pounds. Divide that ceiling by capacity and the wall supports fluids up to roughly 12.5 pounds per gallon, so check your fluid's weight-per-gallon against that number and plan your foundation for the loaded weight of whatever you are actually storing, not just the water figure. Confirm the tank's outer diameter and overall height against the technical drawing on this page before you finalize your pad or building clearance, and confirm the fitting schedule with us before ordering by calling 866-418-1777. For a level, full-perimeter foundation under a tank this size, our concrete pad sizing guide walks through the ACI framework that applies to above-ground polyethylene tanks. If you are still comparing capacities, the Tank Sizing Calculator and Tank Sizing Guide help you match a vertical tank to your draw and refill cycle.
Freight and getting it delivered
This is a large-diameter tank, so it ships LTL on a dedicated freight line rather than by parcel. It ships from Snyder's plant in Chowchilla, California, and freight is quoted live to your ZIP based on that shipping point. Because it moves from a single California plant, delivery to East Coast and Midwest addresses carries a meaningful freight line-item, so running the numbers before you order is not optional. Put your delivery address through our Freight Cost Estimator for a real number, or call 866-418-1777 and we will quote it and confirm delivery access for a tank this size.
The mistake to avoid
The most common error on a tank this large is underbuilding the foundation. Size your pad for the loaded weight of your specific contents, not the empty tank and not just the water number. If you ever store something denser than water, use the roughly 12.5 pounds-per-gallon ceiling above so the 1.5 specific gravity rating actually works in your favor rather than becoming a surprise. This tank suits bulk water storage as well as reuse and aggregation storage. If your project references NFPA 22 sizing for a rural reservoir, our fire-water reservoir design guide covers that sizing discipline and cold-climate freeze protection, and our water reuse topology guide covers grey-water, rainwater, and condensate aggregation for storage of this scale.
