Skip to main content

Norwesco

Norwesco 100 Gallon Doorway Water Storage Tank with Slimline Design in Black

$409.05
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-44986
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
41.00 LBS
Width:
22.00 (in)
Height:
45.00 (in)
Depth:
38.00 (in)
Capacity:
100 Gallons
Material:
Polyethylene
Color:
Black
Length:
38"
Outlet:
1.25
Lid/Manway:
8"
Specific Gravity:
1.5
Max Temperature:
120 F / 48 C
Certifications:
FDA-compliant resin
Freight Class:
LTL
NMFC Code:
156600-02
Manufacturer Part Number:
44986
Manufacturer:
Norwesco
Technical Drawing:
https://onesourceplastics.com/content/norwesco-technical-drawings/norwesco-100-gallon-doorway-water-storage-tank-with-slimline-design-in-black-44986.pdf
Ship Weight:
50 lb
Ship Dimensions:
38" L x 22" W x 45" H
Specific Gravity Rating:
1.5 (Max 12.52 lbs/gal)
Lid Size:
8"

A 100 gallon black doorway tank that fits through a standard door and stands against a wall

The Norwesco 100 gallon doorway water storage tank with slimline design in black, part number 44986, is a polyethylene tank built to go where a round tank cannot: 22 inches wide, 38 inches long and 45 inches tall, weighing 41 lb empty. The narrow side goes through an interior door, down a hallway or through a gate, and the tank then stands flat against a wall in a basement, a garage, a utility room or a greenhouse. It has a 1.25 inch outlet low on the tank and an 8 inch lid on top. The tank is rated for liquids up to 1.5 specific gravity, a maximum of 12.52 lb per gallon; 100 gallons of water weighs 834 lb. The resin is FDA compliant per Norwesco and the service limit is 120 F (48 C). Black keeps light out of the contents, which slows algae in stored water.

Will it fit the space? Call 866-418-1777 with the door width and the wall you have in mind, or get freight to your ZIP and add it to your cart above.

Where a doorway tank goes

Doorway tanks are bought for indoor water: an emergency reserve in a basement, a rainwater tank beside a downspout where the wall is close to the lot line, a feed tank for a hydroponic bench, a holding tank in a workshop, a water supply for a remote cabin that is carried in by hand. The 22 inch width is the number that matters; measure the narrowest opening on the route in, not the room at the end. Full, it carries 834 lb of water on top of the 41 lb tank on a footprint of 38 by 22 inches, which a concrete floor takes without comment and a wood floor should be checked for. Our doorway tank sizing guide from 100 to 1000 gallons by application matches the size to the job, and the guide to fire water reserves for rural and remote sites covers how small indoor tanks fit into a bigger reserve.

What goes in it

Water first: stored, collected or carried. Polyethylene also handles many common liquids, and the 1.5 rating covers anything up to one and a half times the weight of water, but a tank sold as a water storage tank is best kept to water and the mild solutions a greenhouse or a workshop uses. Keep the contents under 120 F and the tank out of direct freezing where you can; a full tank indoors is the easy case. If you are combining rainwater, grey water or condensate, our guide to water reuse tank layouts explains why each stream gets its own tank. For the volume, use the tank sizing calculator and tank sizing guide.

Openings and fittings

  1. Outlet. A 1.25 inch outlet low on the tank. Tell us the valve or the pump you are connecting and we will confirm the fitting type before the order ships, so the adapter is right the first time.
  2. Lid. An 8 inch lid on top, large enough to fill from a hose or a bucket and to drop a float switch or a pump intake through.
  3. Drawing. Norwesco's drawing for this tank, linked under Technical Drawing on this page, shows the outlet height and the lid position for planning the plumbing against the wall.

Sizes nearby

Same size in white and without the outlet fitting, for a tank you want to plumb yourself: the 100 gallon white doorway tank without fitting. Bigger, same shape: the 250 gallon black doorway tank. Smaller and rectangular: the 50 gallon rectangular tank with a 1 inch fitting. Two of these 100 gallon tanks side by side are often the answer when one wall is short.

Shipping and receiving

The tank ships LTL from the nearest of Norwesco's Shawnee, Sheldon or St. Bonifacius plants, 38 by 22 by 45 inches and 50 lb packed. The listed price is before freight; the freight cost estimator gives the cost to your ZIP. One person carries it in. Check the part number against 44986 at the door, look at the outlet for transit damage, and fill it with water the first time, in place, before it holds anything else.

Questions before you order? Call 866-418-1777.

‌‌‌​‌‌​‌‌​‌‌‌​‌​​​‌‌​​​‌​​‌‌​‌​‌‌​‌‌‌‌​​

Freight and documents

Ships from: Sheldon, IA; St. Bonifacius, MN; Shawnee, OK. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Norwesco 44986.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Product video. Watch the Norwesco 100 Gallon Doorway Water Storage Tank with Slimline Design in Black video (71 seconds) with dimensions, fittings and shipping notes.

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added