Skip to main content

Norwesco

Norwesco 335 Gallon Black Elliptical Leg Tank

$987.57
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-42971
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
109.00 LBS
Width:
48.00 (in)
Height:
33.00 (in)
Depth:
71.00 (in)
Capacity:
335 Gallons
Material:
Polyethylene
Color:
Black
Length:
71"
Outlet:
2" PP Female NPT Bulkhead Fitting w/ Siphon Tube
Lid/Manway:
16" Threaded Vented Manway
Specific Gravity:
1.5
Max Temperature:
120° F / 48° C
Certifications:
FDA-compliant resin, NSF 61
Warranty:
3 Year Warranty
Freight Class:
300
Manufacturer Part Number:
42971
Manufacturer:
Norwesco
Technical Drawing:
https://onesourceplastics.com/content/tech-drawings/42971.pdf
Ship Weight:
109 lb
Ship Dimensions:
71" L x 48" W x 33" H
Specific Gravity Rating:
1.5 (Max 12.52 lbs/gal)
Lid Size:
16"
Tank Bands:
2 bands required (band part N-63546)
Add-ons:
N-63546 x2 required

A 335 gallon black elliptical leg tank that rides low in a pickup bed

The Norwesco 335 gallon black elliptical leg tank, part number 42971, is a polyethylene transport and storage tank 71 inches long, 48 inches wide and only 33 inches tall, weighing 109 lb empty. The elliptical shape is the point: the tank sits lower than a round leg tank of the same volume, so the load rides below the bed rails and the center of gravity stays down where a truck or trailer wants it. It comes with a 2 inch polypropylene female NPT bulkhead fitting as the outlet and a 16 inch threaded vented manway on top. Norwesco rates it for liquids up to 1.5 specific gravity, which is 12.52 lb per gallon, so water, most liquid fertilizers and many common chemicals are within range; 335 gallons of water weighs 2794 lb. The resin is FDA compliant per Norwesco, Norwesco lists the tank as NSF 61, the service limit is 120 F, and Norwesco backs it with a 3 year warranty. Black keeps light out of the contents, which slows algae in stored water.

Will it fit your truck? Get freight to your ZIP and add it to your cart above, or call 866-418-1777 with the bed or deck measurements and we will check the footprint with you.

In a pickup, on a trailer or on the ground

At 71 by 48 inches the tank fits lengthwise in a full size pickup bed, and at 33 inches tall it stays under most tonneau rails and below the cab window, which a round leg tank of the same volume does not. Full of water it weighs close to 2800 lb before you add the tank, so the truck's payload rating, not the tank, is usually the limit; check the door sticker before you fill it. Strap it through the moulded leg recesses, never over the manway, and look at the add-ons box on this page for the bands Norwesco makes for this tank where it will ride on a vehicle. On the ground it needs a flat, continuous surface under every leg. Our guide to Norwesco applicator and leg tanks for fertilizer and the DOT non-roadable trailer rules covers how a tank like this is classified on the road.

What goes in it

Water, liquid fertilizer and the common farm and treatment chemicals that polyethylene handles are the normal loads. Check anything else in our chemical compatibility guide first; the entries for urea solution, DEF, calcium chloride, sodium hypochlorite and sulfuric acid are the ones leg tank buyers ask about most. Liquids heavier than 1.5 times water need a heavy duty tank, not this one. If you blend fertilizer in it, read our note on fertilizer blend stratification and how to catch it before the spreader runs off spec. For the volume itself, the tank sizing calculator and tank sizing guide will tell you whether 335 gallons covers a day's work.

Openings and fittings

  1. Outlet. A 2 inch polypropylene female NPT bulkhead fitting, factory installed low in the tank. Your valve, camlock or hose adapter threads straight into it. Support the valve and the first length of hose so the fitting carries liquid, not hardware.
  2. Manway. A 16 inch threaded vented manway on top: wide enough to fill from a hose or a pump, to drop a float in, and to get a hand and a brush inside to clean. The vent lets air in as you draw down, so do not seal it.
  3. Drawing. Norwesco's drawing for this tank, linked under Technical Drawing on this page, shows the exact outlet and manway positions and the leg layout for strap planning.

Sizes nearby

Same tank in white, for liquids where you want to see the level through the wall: the 335 gallon white elliptical leg tank. One size down: the 235 gallon black elliptical leg tank. One size up: the 535 gallon black elliptical leg tank. The colour swatches above the price switch between the versions of this tank.

Shipping and receiving

The tank ships LTL at freight class 300 from the nearest of Norwesco's plants in Hanford, California, Shawnee, Oklahoma, or Washington Court House, Ohio, 71 by 48 by 33 inches on a pallet. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. Bands ordered with the tank travel with it. At the tailgate, check the part number against 42971 on the bill of lading, look at every leg for transit damage, and fill it with water the first time before it carries anything else.

Questions before you order? Call 866-418-1777.

‌‌‌​‌​​‌‌‌​​​‌‌‌​​​​‌‌​​​‌​​‌‌​‌‌‌​​‌​​​

Freight and documents

Ships from: Hanford, CA; Washington Court House, OH; Shawnee, OK. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Norwesco 42971.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added