The Snyder Industries 110 Gallon ASTM XLPE Heavy Duty Vertical Storage Tank is a crosslinked polyethylene vertical tank built for demanding storage where wall toughness matters. It holds 110 gallons in a compact 33-inch footprint and stands 41 inches tall, tucking into corners, pump sheds, and utility rooms without eating floor space. Molded in natural white resin, it is a genuine XLPE (crosslinked linear polyethylene) tank rated to a 1.9 specific gravity, which is why buyers searching for a heavy-duty vertical storage tank or a Snyder XLPE tank land here.
Will it work for your site?
Water fills this tank to roughly 917 pounds when full, but the 1.9 specific-gravity rating means it is engineered to carry up to 1,743 pounds of contents. That is the real value of a 1.9-SG wall: it holds far more than water, so it is suited to heavier solutions and dense liquids, not just plain storage. Plan your pad and anchoring around the loaded weight, not the empty shell. Fittings shown on the technical drawing on this page include a 10-inch polyethylene threaded fill topped by a tethered cap with a 7-inch access opening, two fitting flats (including a 7-inch by 10-inch flat) for tie-in points, and a flange, giving you defined locations for fill and draw lines. Confirm the exact fitting locations and thread sizes against the technical drawing before you plumb, size any bulkhead-fitting gasket to the fitting-flat dimensions, and use fittings rated for polyethylene threads. If you are still matching capacity to your daily draw or storage window, our Tank Sizing Calculator, Tank Sizing Guide, and the Snyder Captor freeboard sizing guide help you land on usable volume.
Why crosslinked polyethylene here
The XLPE wall is the reason to choose this tank over a standard HDPE vertical of the same size. Crosslinking builds a denser, more impact- and stress-crack-resistant wall, consistent with its 1.9 specific-gravity rating and heavy-duty classification. If you are weighing crosslinked against linear polyethylene for your duty, our guide on Snyder XLPE vs HDPE: when crosslinking matters walks through where the difference actually pays off. For above-ground installs, size the base correctly the first time using our concrete-pad sizing framework, and if this tank is going into a rural fire-water or freeze-prone role, our fire-water reservoir design guide covers reserve sizing and cold-climate protection.
The mistake to avoid
Do not undersize your foundation or skip anchoring because the empty tank feels light. The number that matters is the loaded weight, up to 1,743 pounds at full 1.9-SG contents, and that load has to be supported and restrained for the life of the install. Set it on a flat, fully supporting pad and follow the manufacturer's tie-down guidance for wind and seismic conditions in your area.
This tank ships LTL freight from the Snyder plant in Marked Tree, Arkansas, quoted live to your ZIP. Get your freight quote in seconds with the Freight Cost Estimator, or call us at 866-418-1777 and we will size, quote, and stage your order. Freight is quoted separately from the list price shown above.
