The 1.5 rated, ASTM certified 3,000 gallon tank
The Snyder 5130300N43 holds 3,000 gallons in a white polyethylene shell 96 inches across and 111 inches tall, weighing 600 pounds. It is the middle rating of Snyder's certified 3,000 gallon family: a wall rated for a specific gravity of 1.5, or 37,530 pounds of contents against 25,020 for water, sold with ASTM certification for the submittal. A 3 inch outlet at the base, an 18 inch threaded, vented manway, and a 3 year warranty.
Is this the right 3000 gallon tank? Call 866-418-1777 with the liquid, the site and the ceiling height, or get freight to your ZIP and add it to your cart above.
When 1.5 is the right wall
Brine, liquid fertilizer, dilute acids and caustics, most coagulants at delivered strength: these sit between 1.0 and 1.5 and do not need the cost of the 1.9 wall, and they are heavier than the 1.35 wall is rated for at the top of the range. Look up the density of what you buy at its concentration; between 1.35 and 1.5, this is the tank. The certification is against ASTM D1998, and the HDPE tank wall thickness guide explains how the wall is sized under it and why inspection happens above the liquid line. The 3,000 gallon vertical tank buyers guide compares this tall shape against the low profile tanks; the tank sizing calculator and the tank sizing guide settle the volume.
The certified family and the water tank beside it
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 5130300N43 (this tank, 1.5 SG) | 3,000 | 96 x 111 in | 600 lb |
| 5130300N39 (1.35 SG) | 3,000 | 96 x 111 in | 480 lb |
| 5130300N45 (1.9 SG) | 3,000 | 96 x 111 in | 720 lb |
| 32267 (1.5 SG, siphon outlet) | 3,000 | 96 x 109 in | 554 lb |
| 5130000N33 | 3,000 | 90 x 127 in | 510 lb |
The 5130300N39 saves 120 pounds of resin for lighter liquids and the 5130300N45 adds 120 for the concentrates. The 32267 is the uncertified 1.5 rated tank on the same base, 2 inches shorter, with a siphon outlet for a basin mount. The 5130000N33 is the 90 inch base alternative at 127 inches tall.
Comparing across brands too? Call 866-418-1777; we carry Norwesco, Snyder, Chem-Tainer, Enduraplas and Bushman and will say which one fits, or price the freight first.
Access and outlet
- Outlet: 3 inch, at the bottom of the sidewall; a flanged transition, an expansion joint, and a valve supported off the slab.
- Access: 18 inch threaded, vented manway.
- Service limit: 120 F / 48 C.
Strap the empty tank against wind with two bands over the top to anchors in the slab, fill through a dip tube so dense liquid does not splash the lid, and keep the vent clear so a fast draw cannot pull a vacuum on the wall. A white tank shows its level in daylight; in a pump room, a hydrostatic sender at the outlet. Full, the tank loads a 96 inch circle to 37,530 pounds at the rating, a slab in full contact under the whole floor.
Put to use
Liquid fertilizer at a co-op, brine at a softener plant, dilute treatment chemicals at a plant that needs the certification on file, and bulk water where a heavier wall is wanted outdoors. In a freezing climate a solution expands against a wall not designed for ice; house the tank or keep it above freezing.
How it ships
At 96 inches across and 111 inches long on the deck the 5130300N43 is oversize freight (NMFC 156600) on a flatbed at a lane rate; the freight cost estimator prices it for your ZIP, and the listed price is before freight. A forklift with long forks sets 600 pounds on the slab. Water-test in stages with a hold, check the outlet after the hold, and file the certification with the project. A strap that is checked once a season is a strap that holds; put it on the same calendar as the gutters.
Freight and documents
Ships from: Chowchilla, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 5130300N43.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
