The Snyder Industries 3650 Gallon XLPE Black Vertical Storage Tank is a crosslinked linear polyethylene vertical storage tank built to ASTM standards for demanding bulk water and higher-density liquid service. It holds 3,650 gallons in a body measuring 126 inches tall by 102 inches wide by 102 inches deep, so check gate, door, and truck-access clearance against those dimensions before delivery day. Its crosslinked wall carries a 1.5 specific gravity rating - the ceiling for this tank - meaning it is rated to hold contents up to 1.5 times the weight of water, well above what a standard water-only tank tolerates.
Will this vertical storage tank work for your site?
Plan your pad and structure around real loaded weight, not just gallons. Filled with plain water this tank carries about 30,441 pounds; loaded to its full 1.5 SG ceiling, contents alone can reach 45,662 pounds. That load sits entirely on the 102 x 102 inch footprint, so a properly sized, level pad is not optional - work the numbers with our Tank Sizing Calculator and Tank Sizing Guide, and for a poured base see our guide on concrete pad sizing for above-ground polyethylene tanks. As a black XLPE tank it blocks light to limit algae growth, and the crosslinked wall resists environmental stress cracking better than a comparable non-crosslinked linear polyethylene tank of the same size. Because it is rated to 1.5 SG, its wall gives you structural margin over a standard 1.0 SG water-only tank rather than pointing you toward a denser option.
Fittings and access
This tank is molded with the following provisions: a flange; an 18-inch PE threaded and vented fitting; a manway with 15-inch access for interior entry and cleaning; a 12 x 13.75 inch S.U.M.O. flat-spot fitting; and additional S.U.M.O. flat pads for outlets, fill lines, and level instrumentation. Confirm each fitting size and elevation against the technical drawing on this page before you plumb the tank, since bulkhead and outlet placement drive your inlet and suction routing. Note that outlet bulkhead fittings and gaskets are specified and quoted separately and must be matched to the SUMO flat pads and your outlet elevation - call 866-418-1777 to confirm the fitting kit so plumbing hardware isn't assumed to be included.
Common water-storage roles
A vertical tank of this capacity is a workhorse for rural and remote water reserves. If you are sizing it for private fire protection, our guide on fire-water reservoir tank design walks through NFPA 22 sizing discipline and cold-climate freeze protection. For reclaimed and blended supplies, see our breakdown of industrial water reuse tank topology for grey-water, rainwater, and HVAC condensate aggregation.
This 3,650-gallon Snyder tank ships LTL freight from the Snyder plant in Marked Tree, Arkansas, quoted live to your ZIP code. It is an oversized LTL unit, so confirm delivery access and offloading - forklift, crane, or tilt-off - along with your exact rate using our Freight Cost Estimator, or call 866-418-1777 to lock in delivery and confirm fittings before you order.
Freight and documents
Ships from: Marked Tree, AR. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 8190000N46.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
