Horizontal leg tanks integrate molded support legs into the tank shell — no separate cradle or stand purchase, no bolt-up, no failure interface between vessel and support. The leg geometry is the defining feature: it sets ground clearance for outlet valves, drainage to a sump, and field-side accessibility. Catalog covers Norwesco, Snyder Industries, Chem-Tainer, Enduraplas, and Bushman leg-tank SKUs from 35 gallons (utility) to 3,200 gallons (commercial nurse / hauling).
Applications
Agricultural nurse-tank service — water and chemical refill for sprayers in the field
Stationary bulk storage where overhead clearance is limited (low-profile horizontal)
Mobile DEF / AdBlue refueling and dispensing
Skid-mounted dosing and chemical staging
Compliance & Standards
Typically rotomolded to ASTM D1998; FDA 21 CFR 177.1520 resin compliance varies by model (see each product's Specifications). Leg tanks intended for highway transport must use proper baffling — verify whether your selected SKU includes internal baffles or is sold as stationary-only. DOT 49 CFR 178.345 governs portable cargo tanks for hazmat; consult your shipper for non-water transport. For ag/non-hazmat use, follow OEM strapping and load-securement spec.
Engineering & Selection
Two configurations dominate this catalog: cone-bottom legs (sump-style, total drain to a centerline outlet) and flat-bottom legs (residual but simpler geometry). Sump-bottom variants drain completely for chemical service; flat-bottom variants are cheaper and adequate for water. Saddle/cradle is built in — no additional band or stand purchase. Confirm outlet diameter and position before ordering: 2" for gravity to drum, 3"–4" for pump-suction or transfer line.
Freight & Delivery
Tanks ship LTL motor freight from the closest stocking warehouse to your delivery ZIP. Typical transit 5–10 business days. Liftgate available at delivery (per-shipment fee). Always inspect at delivery and note damage on the bill of lading before signing — that is the carrier claim trigger. Bulk-order consolidation reduces per-tank freight 25–40%. Get your LTL freight quote by ZIP, or call 866-418-1777 for same-business-day quoted pricing.
Sizing & Selection
Match capacity to your trailer or skid footprint. Most leg tanks list axle-to-axle length and outside width — confirm against your platform before ordering. Need a sizing or compatibility review? 866-418-1777.
The Norwesco 1325 Gallon Black Heavy Duty Horizontal Leg Tank is a transport-and-haul tank built for moving water and ag liquids in the field. Molded in black polyethylene with a 1.9 specific gravity...
The Norwesco 1335 Gallon HDPE Horizontal Elliptical Leg Tank in blue is a transport-and-store workhorse for liquid fertilizer, water hauling, and chemical service on a truck bed or applicator trailer...
The Norwesco 1335 gallon black heavy duty elliptical leg tank is built for over-the-road agricultural haul work where a low, wide center of gravity matters. The elliptical cross-section sits on...
The Enduraplas 1100 Gallon White Horizontal Leg Tank is a polyethylene horizontal leg tank built for hauling dense liquid where you need it, then setting it down level on a self-supporting footprint...
The Enduraplas 1100 Gallon Black Horizontal Leg Tank is a haul-class polyethylene tank built to travel full down the road and across the field, riding on its molded legs. At 94 inches long, 60 inches...
The Enduraplas 1100 Gallon Green Horizontal Leg Tank is a polyethylene haul tank built to ride in a steel saddle or trailer frame and move liquid down the road or across the field. It holds 1,100...
The Enduraplas 1100 Gallon Yellow Horizontal Leg Tank (SKU THF01000Y) is a polyethylene horizontal leg tank built for hauling and field transfer, where the load rides low on molded legs that keep the...
The Enduraplas 1000 Gallon White Horizontal Sump Bottom Leg Tank (SKU THD01000W) is a 1000-gallon natural white polyethylene horizontal leg tank built for transport and applicator work where the load...
The Enduraplas 1000 Gallon Yellow Horizontal Sump Bottom Leg Tank is a polyethylene transport-and-process tank built for heavy liquids, with a 1.9 specific-gravity rating that puts it at the top of...
The Enduraplas 1000 Gallon Black Horizontal Sump Bottom Leg Tank (SKU THD01000B) is a polyethylene transport and applicator tank built for moving liquid loads instead of parking them. At 94 inches...
The Enduraplas 1000 Gallon Green Horizontal Sump Bottom Leg Tank is a polyethylene horizontal leg tank rated for a 1.9 specific gravity, built to haul heavier-than-water liquids over the road on a...
The Norwesco 1610 Gallon Horizontal Elliptical Leg Tank (N-42320) is a black polyethylene horizontal leg tank rated to 1.5 specific gravity, built for hauling liquid that doesn't ride along the...