Skip to main content

Snyder Industries

Snyder Industries 1000 Gallon Black Vertical Water Storage Tank

$1,799.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
SII-WB41R
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
160.00 LBS
Width:
72.00 (in)
Height:
65.00 (in)
Depth:
72.00 (in)
Capacity:
1000 Gallons
Material:
Polyethylene
Color:
Black
Diameter:
72"
Inlet:
1-1/2" PP Female NPT Bulkhead Fitting
Outlet:
2" PP Stainless Steel Bolted Fitting
Lid/Manway:
18" Threaded Vented Manway
Specific Gravity:
1.0
Max Temperature:
120° F / 48° C
Certifications:
FDA-compliant resin, NSF 61
Warranty:
3 Year Warranty
Freight Class:
400
Manufacturer Part Number:
WB41R
Manufacturer:
Snyder Industries
Technical Drawing:
https://onesourceplastics.com/content/tech-drawings/wb41r.pdf
Ship Weight:
160 lb
Ship Dimensions:
72" L x 72" W x 65" H
Lid Size:
18" Threaded Vented Manway

1,000 gallons of black water storage under five and a half feet

The Snyder WB41R is a black polyethylene water tank that holds 1,000 gallons in a shell 72 inches across and only 65 inches tall, weighing 160 pounds. It is the tank for water in full sun under a low eave: the black wall keeps light out so the water stays clear of algae, and the wide, low shape stands without a strap with the 18 inch threaded, vented manway reached from a step. A 1-1/2 inch polypropylene female NPT bulkhead inlet, a 2 inch polypropylene bolted outlet with stainless hardware, a 3 year warranty, and a rating of 1.0 specific gravity for water and liquids no heavier.

Want it on your site? Get LTL freight to your ZIP, add it to your cart above, or call 866-418-1777 and a tank specialist will confirm the fit.

Four tons of water under a low eave

Full, the WB41R puts 8,340 pounds on a 72 inch circle, and a rotationally molded floor bears on the whole pad, so the pad is what matters: a compacted, screeded gravel base or a slab in full contact; at 65 inches it sits low enough that no strap is needed. Black polyethylene absorbs the ultraviolet that ages a white wall and passes no light to the liquid, so a black tank outdoors holds water clear for years; it also runs warmer than a white one, which matters for water in a hot climate. Our 1,000 gallon black water tank buyers guide compares the shapes at this volume across makers; the tank sizing calculator tells you whether 1,000 gallons covers the draw, and the tank sizing guide covers days of supply.

Snyder's 750 to 1,100 gallon water tanks

Snyder vertical water tanks, 750 to 1,100 gallons
PartGallonsDiameter x heightEmpty weight
WB41R (this tank, black, low profile)1,00072 x 65 in160 lb
WG41R (green, low profile)1,00072 x 65 in205 lb
32523 (tall)1,00060 x 89 in157 lb
32525 (tall)1,00060 x 89 in202 lb
WB42 (black, low profile)1,10086 x 53 in210 lb
32517 (doorway)75048 x 106 in117 lb

The WG41R is the same low tank in green, heavier in the wall, for a site where green hides better than black. The 32523 and 32525 stand the same 1,000 gallons on a 60 inch base at 89 inches for a corner with height and no floor, the WB42 lays 1,100 gallons of black down even lower on an 86 inch base, and the 32517 is the 750 gallon doorway tank.

Picked the 1000 gallon tank? Add it to your cart above; freight is quoted to your ZIP before you pay anything.

The three openings

  • Inlet: 1-1/2 inch polypropylene female NPT bulkhead fitting.
  • Outlet: 2 inch polypropylene bolted fitting with stainless hardware, at the base; a flexible connector between the fitting and hard pipe, and the valve supported off the pad.
  • Access: 18 inch threaded, vented manway, reached from a step.
  • Service limit: 120 F / 48 C.

A bolted outlet spreads the load of a valve and pipe run over a ring rather than a thread, which is welcome on a tank that gets plumbed hard. A 2 inch outlet on a low tank gives a pressure pump a flooded suction to the last few inches; a garden hose runs by gravity but slowly, because there is little head. A black wall shows no level, so fit a float gauge on the manway or a sight tube off the outlet, and a float switch at low level shuts the pump off before it runs dry. If winters freeze, wrap or drain the outlet valve and the first pipe run; the body takes ice from the top down without harm.

Where we ship it

Well storage for a house and a garden under a low eave, a rain cistern beside a barn, stock water on a pasture, a haul-in water supply for a cabin, and one cell of a small fire reserve of the kind the fire-water reservoir design guide describes. Several of them are the storage stage of a reuse system for roof water and condensate, per the industrial water reuse tank topology article, where the dark wall keeps the stored water clear.

How it ships

The WB41R ships as LTL freight at class 400, the class light, bulky tanks take; the freight cost estimator shows it for your ZIP, and the listed price is before freight. Two people carry 160 pounds, and at 72 inches across it goes through a double door or a gate. Fill it to the manway once, check both fittings, and set it where the outlet faces the pump, because a low tank is not easily turned once it is full. Keep the delivery paperwork with the tank; the serial number on the shell is what a warranty claim starts from.

‌‌‌‌‌​​‌‌‌‌‌​​​​‌​‌​‌‌​​‌​‌‌‌​​​​‌‌​‌‌‌​

Freight and documents

Ships from: Merced, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Snyder Industries WB41R.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added