The Snyder Industries 1100 Gallon Vertical Liquid Storage Tank is built for bulk water and heavier-liquid storage where a tall, compact footprint matters. It stands 91 inches tall on a 64-inch-diameter base, holds 1,100 gallons, and is molded from polyethylene in white. The white resin lets you read the liquid level through the wall in good light, which makes routine checks faster on a vertical storage tank of this height. With a 1.5 specific gravity rating, the shell is engineered for liquids substantially heavier than water, so you have real headroom beyond plain water service.
Will it work for your site?
The numbers that matter: 91 in tall, 64 in diameter, 64 x 64 in footprint, 1,100 gallons. Filled with water this vertical tank carries roughly 9,174 lb of contents, and it is rated to hold up to 13,761 lb at its 1.5 specific gravity ceiling — which is what makes it a candidate for brines and heavier liquids, not just water. Plan the pad accordingly: a full vertical tank concentrates that weight on a 64.0 x 64.0 inch footprint, so a level, continuously supported concrete base sized to the full diameter is the right foundation. The 91-inch height keeps the floor area small, which is the main reason a vertical tank gets chosen over a low, wide design when space is tight — just confirm your overhead clearance and any doorway or gate width against those dimensions before delivery. If you are weighing this capacity against a taller or shorter model, the Tank Sizing Calculator and Tank Sizing Guide walk through matching gallons, footprint, and weight to your space.
The mistake to avoid
The 1.5 specific gravity rating is the headroom number, not a license to skip the math. Before you store anything denser than water, confirm your liquid's actual specific gravity is at or below 1.5, then verify that same liquid is compatible with polyethylene and with whatever fitting and gasket materials you select — this tank ships without a published fitting layout, so those materials are your call to make and your responsibility to match to the chemistry. The other common miss on a tall vertical tank is the foundation: a base that supports only the edges, or that is not dead level, puts uneven stress on the bottom knuckle of a tank carrying nearly seven tons when full at its rating. Support the entire footprint, fully and flat.
Beyond plain storage
An 1,100-gallon white vertical tank is also a workable rural and remote fire-water reservoir where a piped supply is not available — see our fire-water reservoir design guide for NFPA 22 sizing discipline and cold-climate freeze protection before you commit a tank to that role. For a full walkthrough of this exact size, our 1100 Gallon Vertical Liquid Storage Tank buyer's guide covers fittings, foundation, and placement.
Freight and ordering
This 1100 gallon white vertical storage tank ships LTL freight, quoted live to your ZIP code from whichever Snyder Industries plant is nearest — Lincoln, NE; Marked Tree, AR; or Philippi, WV. That three-plant spread across the Midwest, mid-South, and Mid-Atlantic is real geographic coverage, so the routing that minimizes LTL distance is worth pinning down before you buy. Get a real number for your address with our Freight Cost Estimator, or call 866-418-1777 and we will route it from the closest plant and spec fittings, foundation, and lead time with you before you order.
