The Snyder Industries 1100 Gallon HDPE Vertical Liquid Storage Tank is built for sustained liquid storage where you need real volume in a compact footprint. It stands 90 inches tall on a 64 x 64 inch base, holds 1,100 gallons, and carries a 1.5 specific gravity rating - meaning it is engineered to handle contents up to 1.5 times the density of water, not water alone. Molded by Snyder Industries in white HDPE and stamped per ASTM D1998, it is a vertical storage tank sized for water, irrigation supply, fire-water reserves, and general liquid handling.
Will it work for your site?
Match the tank to your liquid by weight, not just gallons. Filled with water at full capacity, the contents alone weigh roughly 9,174 pounds, and at the tank's maximum 1.5 SG rating the contents can reach 13,761 pounds. That load sits on a 64.0 x 64.0 inch footprint, so confirm your pad or stand can carry the concentrated weight before delivery. The 90 inch height keeps the base compact, which helps on tight pads, but plan your fill and outlet plumbing around that vertical profile. Outlet, bulkhead, and gasket sizes are not published in this listing's data - confirm them on the technical drawing on this page, or call 866-418-1777 before you order fittings. To check whether 1,100 gallons covers your draw and refill cycle, run the numbers through our Tank Sizing Calculator or read the Tank Sizing Guide.
The mistake to avoid: size to specific gravity, not gallons
The most common error on a 1.5 SG vertical tank is sizing the pad, stand, and fittings to water weight when the stored liquid is denser. This tank is rated to 1.5 specific gravity, so heavier liquids load the wall, fittings, and foundation harder than water does. When you spec the support structure, use the maximum rated contents weight of 13,761 pounds - not the 9,174 pound water figure - and remember that load concentrates over a 64 x 64 inch base. The wall-thickness logic behind ASTM D1998 ratings, and why the vapor-saturated headspace zone matters for long-term durability, is covered in our guide on HDPE tank wall thickness and ASTM D1998 sizing logic. If you need secondary containment at this SG rating, the Snyder Captor double-wall freeboard guide walks through freeboard sizing per ASTM D1998 for denser liquids. For fire-protection service, the fire-water reservoir design guide covers NFPA 22 sizing discipline and cold-climate freeze protection.
Freight
This vertical tank ships LTL freight from the Snyder plant in Marked Tree, AR, with the rate quoted live to your ZIP code at the time of order. Because freight on a tank this size depends on distance and your delivery site, get an exact number before you buy with our Freight Cost Estimator, or call us at 866-418-1777 and we will quote it for you. For more on how this class of tank is specified and applied, see our related 1100 gallon vertical liquid storage tank buyer's guide. Questions on dimensions, fittings, or whether this Snyder vertical tank fits your application? Call 866-418-1777 and we will help you spec it right the first time.
