Snyder Industries 1100 Gallon HDPE Vertical Liquid Storage Tank with ASTM Certification West Virginia

The heavy wall, laid low and certified

A 1.9 specific gravity wall is sized for a liquid nearly twice as dense as water, the class ferric chloride at strength and the heavy brines fall in, and the certification against ASTM D1998 is what says the wall was sized that way; the HDPE tank wall thickness guide explains the sizing logic and why the headspace is where a wall ages, and the freeboard sizing guide works out the usable volume once thermal expansion is accounted for. Eleven hundred gallons at 55 inches goes where a tall tank would not, and the wide base sits low enough that no strap is needed; full, it puts 17,431 pounds on an 86 inch circle at the rating, which a slab in full contact carries. The 1,100 gallon vertical tank buyers guide compares the low shapes at this volume across makers; the tank sizing calculator sizes the tank to feed rate and delivery interval, and the tank sizing guide covers the reserve.

Snyder's 1,000 to 1,200 gallon verticals

The WV42 is the water-rated tank in this same low shape, 2 inches shorter, and the 32531 holds 1,200 gallons on this base 2 inches taller. The 1830000N43 and 1830000W94303 stand 1,100 gallons on a 64 inch base at 90 inches with the 1.5 wall, the first certified, for a site with height and less floor, and the 1831000C26 is the general 1,000 on a 60 inch base.

Still deciding between these? Freight to your ZIP often settles it; the wider tanks ship differently. Or call 866-418-1777 and we will walk the table with you.

Access and outlet

• Access: 18 inch manway; filled by hose or truck through a dip tube, vented outside on anything that fumes.
• Outlet: tell us the liquid when ordering and the bulkhead fitting is matched to it; a flexible transition to the pump suction and a valve supported off the pad.
• Service limit: 120 F / 48 C.
• Listing: ASTM certification.

The low shape keeps a pump's suction flooded to the last few inches and puts the manway within reach of a step. The white wall shows the level in daylight; fit a low-level float switch so a pump never runs dry. On a chemical, choose the sender for the liquid, keep the manway closed against vapor loss, and shade the tank where the chemical is light-sensitive. In a freezing climate insulate or drain the outlet valve and the first run of pipe.

Put to use

Ferric and other dense coagulants at a small plant with a berm and a low roof, heavy brine for a softener bank, fertilizer concentrate on a farm, and water where the buyer wants the heaviest certified wall on a low tank, including one cell of a small fire reserve of the kind the fire-water reservoir design guide describes. One liquid per tank, labeled.

How it ships

The 1710100N45 ships palletized as LTL freight (NMFC 156600-01) at a class rate; the freight cost estimator shows the lane to your ZIP; the listed figure is the price before freight. Two people carry 180 pounds, and at 86 inches across it needs a gate, not a door. Fill it to the manway once, hold it, check the outlet fitting, and keep the certification paperwork with the project file. A strap that is checked once a season is a strap that holds; put it on the same calendar as the gutters.