2,500 gallons at 1.9 specific gravity, under eight feet
The Snyder 32200 is a white high density linear polyethylene vertical liquid storage tank, 96 inches across and 90 inches tall, holding 2,500 gallons at 562 pounds. Its wall is rated for a specific gravity of 1.9, or 39,615 pounds of contents against 20,850 for water, the chemical-grade wall on a low, wide shape that cannot tip, and the 2 inch outlet carries an internal siphon tube so the tank drains from the floor without a fitting at the very bottom. A 20 inch manway, and it ships as oversize freight.
Want it on the pad this month? Check freight to your ZIP, add it to your cart above, and 866-418-1777 will confirm the ship date.
The heavy wall, laid low
A 1.9 specific gravity wall is sized for a liquid nearly twice as dense as water, the class ferric chloride at strength and the heavy brines fall in, and 562 pounds of resin is what that takes at 2,500 gallons; most low-profile tanks this size carry a 1.5 wall or a water wall. The eight foot base at 90 inches keeps the manway within reach of a short step and puts the load on the pad without the lever arm a tall tank has in wind. A siphon tube outlet draws from the floor through a fitting set higher on the wall, which keeps the bulkhead out of the sediment; prime it once and it stays primed. Full, it puts 39,615 pounds on a 96 inch circle at the rating, which a slab in full contact carries. The 2,500 gallon vertical tank buyers guide compares the shapes at this volume across makers; the tank sizing calculator sizes the tank to feed rate and delivery interval, and the tank sizing guide covers the reserve.
Snyder's 2,000 to 2,650 gallon verticals
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 32200 (this tank, 1.9 SG, siphon outlet) | 2,500 | 96 x 90 in | 562 lb |
| 5090000C26 | 2,500 | 90 x 107 in | 450 lb |
| 5090000C37-BLACK | 2,500 | 90 x 107 in | 450 lb |
| 32170 (1.5 SG, siphon outlet) | 2,000 | 96 x 73 in | 426 lb |
| 5050000C26 | 2,000 | 90 x 88 in | 340 lb |
| 8390000C26 | 2,650 | 102 x 97 in | 510 lb |
The 5090000 tanks stand 2,500 gallons on a 90 inch base at 107 inches in white and black, in the general grade. The 32170 is the 2,000 gallon step down on this same base at 73 inches with the 1.5 wall and the same siphon outlet, and the 5050000C26 is the general 2,000 on a 90 inch base. The 8390000C26 holds 2,650 gallons on a 102 inch base at 97 inches.
Need a different size? Every tank in the table is in stock programs; ask for a quote on the one that fits, or call 866-418-1777.
Ports
- Outlet: 2 inch polypropylene female NPT bulkhead fitting with an internal siphon tube; a flexible connector between the bulkhead and hard pipe, and the valve supported off the pad.
- Access: 20 inch threaded, vented manway; filled through a dip tube, vented outside on anything that fumes.
- Service limit: 120 F / 48 C.
A siphon outlet needs the pump or the gravity line below the tank floor to stay primed, and a foot of drop is enough; if the line ever runs dry, refill the tank above the fitting and open the valve to re-prime. The white wall shows the level in daylight; a float switch for low level protects a pump. On a chemical, choose the sender for the liquid, keep the manway closed against vapor loss, and shade the tank where the chemical is light-sensitive.
Where you will find one
Ferric and other dense coagulants at a small plant with a berm, heavy brine for a softener bank, fertilizer concentrate on a farm, and water where the buyer wants the heaviest wall on a low tank for a long life outdoors. One liquid per tank, labeled.
Shipping the tank
At 96 inches across the 32200 is oversize freight (NMFC 156600) on a flatbed at a lane rate; the freight cost estimator prices it for your ZIP, and the listed price is before freight. A forklift with long forks sets 562 pounds on the pad. Fill it to the manway once, prime the siphon, and check the outlet fitting before it goes to work. Walk the base after the first hard rain; a pad that shifts shows it at the edge first.
Freight and documents
Ships from: Marked Tree, AR; Merced, CA; Albertville, AL. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 32200.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
