Snyder Industries 70 Gallon ASTM XLPE Heavy Duty Vertical Storage Tank

Beside the pump, inside the building

This is the tank a metering pump draws from in a boiler room, a cooling tower plant, a car wash equipment room or a small water treatment shed. Seventy gallons is a working supply: refilled from a tote or drums on a schedule, read at a glance by whoever walks past. Being able to see the level is the reason to pick natural white for an indoor feed, because a feed tank that runs dry stops the treatment without anyone noticing. The cross-linked wall is made for the harder chemistries; our note on when crosslinking matters for chemistry duty explains where it is worth it. Check your chemical and its strength in our chemical compatibility guide before you order. Keep the tank out of direct sun if the liquid is sensitive to light, because a translucent wall lets light in.

Put it in a containment tray or a bunded area sized for the full 70 gallons if the chemical is one your site has to contain. Strap it to the wall or a rack: empty, 30 lb on a 23 inch base and 42 inches tall tips over if a hose is pulled.

What to check before you buy

1. Fittings. The outlet and lid on 1007200N42 are not listed on this page. Tell us where the pump suction needs to go and the size, and we will confirm what comes on the tank.
2. The floor. Up to about 1,109 lb on a 23 inch circle must sit flat and level, with no bolt head or weld bead under the base. Our concrete pad sizing guide covers slabs.
3. Listings. If an inspector or a spec calls for a listing on this tank, ask us for the written statement for this part number before you buy.
4. The drawing. The technical drawing for 1007200N42 is linked under Technical Drawing on this page.

Sizes and versions nearby

The 1007200 base number in other walls: the black ASTM XLPE 1007200N48 for an outdoor or light-sensitive job, the heavy duty 1007200C26 and the black heavy duty 1007200C34. A little smaller is the 65 gallon heavy duty tank; a little larger is the 90 gallon ASTM XLPE tank. Snyder also makes a 70 gallon ASTM XLPE tank under a different base number; call us if you want the two side by side. Check the volume against your use with the tank sizing calculator and tank sizing guide. For water held for fire use, our fire water reservoir design guide is the place to start; a 70 gallon tank is not a fire reserve.

Shipping and receiving

The tank ships LTL at freight class 250 from Merced, California, as a 23 by 23 by 42 inch load weighing 30 lb. One person can carry it in through a standard door. Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight. At the tailgate, check 1007200N42 on the bill of lading against the tank label, look for cracks at the base and the top, and note any damage before you sign. Fill it with water first and run the pump on water to check every connection before the chemical goes in.