Snyder Industries 850 Gallon ASTM XLPE Heavy Duty Vertical Storage Tank

What it is for

The crosslinked resin, the 1.9 heavy duty rating and the 140 F limit make this a chemical tank first: dense solutions, warm process liquids and chemicals that are hard on a linear polyethylene wall over years. The natural colour is the choice when operators need to see the level at a glance; the trade is that light reaches the contents, so for light sensitive chemicals or water stored in the sun, the black version below is the better pick. Our guide to when crosslinking matters for chemistry duty sets out the trade-offs, and the chemical compatibility guide is where to check your liquid. If the job turns out to be water, our fire water reservoir guide covers sizing and freeze protection. At 48 inches across and 117 inches tall it suits a room with headroom and little floor. Size the volume with the tank sizing calculator and the tank sizing guide.

What to check before you buy

1. Fittings. No outlet fitting is listed for this part. Tell us the outlet size, material and position, and we will confirm what Snyder fits before you order.
2. Manway. An 18 inch threaded vented manway, reached from a platform or fixed ladder at this height. Run a vent line if the chemical fumes.
3. Headroom. Check the ceiling, the doorway and overhead pipe; the tank also needs room to be tipped upright inside the building.
4. The pad and restraint. Up to 13,469 lb at the rating rests on a 48 inch circle. Use a level, continuous pad; see our concrete pad sizing guide, and restrain a tall tank against tipping.
5. Usable volume. Our note on freeboard and thermal expansion explains why the working fill sits below 850 gallons.
6. Drawing. The drawing linked on this page is filed under part 1810000C34; confirm fitting positions on this crosslinked part with us.

Other versions and sizes

The same tank crosslinked in black: the 850 gallon ASTM XLPE black heavy duty tank, 1810000N48. In linear polyethylene: the 850 gallon ASTM black heavy duty tank, 1810000N51, and the 850 gallon black heavy duty tank, 1810000C34. Smaller: the 750 gallon ASTM XLPE heavy duty tank. Larger: the 1000 gallon black heavy duty tank. Each page carries its own dimensions and weight.

Shipping and receiving

The tank ships LTL at freight class 300, 48 by 48 by 117 inches at 220 lb, from the nearest of Snyder's plants that moulds it: Lincoln, Nebraska; Marked Tree, Arkansas; or Philippi, West Virginia. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. Have a forklift or enough hands to unload it. Check the part number against 1810000N42 on the bill of lading, walk the shell for transit damage, and fill it with water first to prove the fittings, then drain it fully before the chemical goes in.

Ready to order? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.