A 1500 gallon black vertical tank on a 64 inch footprint
The Norwesco 1500 gallon black vertical storage tank, part number 40753, is a rotomoulded polyethylene tank 64 inches in diameter and 116 inches tall, weighing 279 lb empty. It puts 1500 gallons on a little over five feet of floor by going up rather than out. It comes with a 2 inch polypropylene female NPT bulkhead fitting as the outlet and a 16 inch threaded vented manway on top. Norwesco rates it for liquids up to 1.5 specific gravity, which covers water, most liquid fertilizers and many common chemicals; 1500 gallons of water weighs 12510 lb. The resin is FDA compliant per Norwesco, Norwesco lists its water tanks under NSF/ANSI 61 (the listing names no models), the service limit is 120 F, and Norwesco backs it with a 3 year warranty. Black keeps light out of the contents and slows algae in stored water.
Ready to order? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
Where the tall 1500 fits
At 116 inches, the manway sits a little under ten feet up, so this is a tank for a pump house with a tall roof, a fertilizer yard, a chemical room, a row of tanks along a wall, or an outdoor pad where height does not matter and floor space does. Plan a platform or a fixed ladder for whoever fills and inspects it. A tall tank shows every bit of lean, so the pad must be flat, level and continuous under the whole bottom and sized for the full weight; our guide to the pad sizing framework for polyethylene tanks covers it. If the tank fills or empties quickly, through a pump or a tanker hose, the manway vent has to pass the air that moves with the liquid; our piece on atmospheric vent capacity for polyethylene storage tanks works the numbers for verticals from this size up. For a rural fire reserve see reservoir design for rural and remote sites; for grey water or condensate, the reuse tank topology piece. Check the volume with the tank sizing calculator and the tank sizing guide.
Openings and fittings
- Outlet. A 2 inch polypropylene female NPT bulkhead fitting, factory installed low in the sidewall. A 2 inch ball valve, camlock or hose adapter threads straight in. Dry-fit it facing the pipe run, tighten, and support the first length of pipe on its own.
- Manway. A 16 inch threaded vented manway on top. It takes a fill line, a float switch and a cleaning brush. Keep the vent clear; a tank that cannot breathe can pull its own wall in on a fast drawdown.
- Liquid and temperature. At or below 1.5 specific gravity and at or below 120 F. A full tank at the rating limit weighs 18765 lb. Heavier liquids need the heavy duty version below.
- Drawing. Norwesco's drawing for this tank, linked under Technical Drawing on this page, shows the outlet height and the manway position.
Sizes and versions nearby
Same tank in white, where you want to read the level through the wall: the 1500 gallon white vertical tank, 40144, and a second white 1500, 41504. For liquids heavier than water, the 1.9 specific gravity heavy duty builds are the 1500 gallon black heavy duty tank, 42018 and the 1500 gallon blue heavy duty tank, 40146. A step down is the 1295 gallon vertical tank, 44968; a near twin in capacity is the 1505 gallon black vertical tank, 44259B, worth comparing on the drawing if your spot has a height limit. The colour swatches above the price switch between the versions of this tank.
Shipping and receiving
The tank ships LTL at freight class 300, upright, 64 by 64 by 116 inches and 279 lb, from the nearest of the Norwesco plants that build it: Fairfield, Texas; Griffin, Georgia; Hanford, California; Owego, New York; Shawnee, Oklahoma; St. Bonifacius, Minnesota; Tooele, Utah; or Washington Court House, Ohio. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. At the tailgate, check the part number 40753 against the bill of lading, look over the full height of the wall for transit damage, and fill it with water the first time before it carries anything else.
Questions before you order? Call 866-418-1777.
Freight and documents
Ships from: Owego, NY; Griffin, GA; Lancaster, OH; St. Bonifacius, MN; Shawnee, OK; Fairfield, TX; Tooele, UT; Hanford, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 40753.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.