The Storage catalog at OneSource Plastics includes every active manufacturer SKU across Norwesco, Snyder Industries, Chem-Tainer, Enduraplas, and Bushman — rotomolded polyethylene tanks. Certifications such as ASTM D1998 construction and FDA 21 CFR 177.1520 food-contact resin compliance vary by model and manufacturer, so check each product's Specifications for what applies to that tank. Use the sort and filter controls below to narrow by capacity, brand, or dimensions.
Applications
Water storage — potable, irrigation, fire suppression, livestock
Industrial process holding, batch mixing, and dosing
Agricultural — fertilizer, herbicide, water hauling, livestock watering
Compliance & Standards
All polyethylene tanks in this category are rotomolded from FDA 21 CFR 177.1520 compliant resin and manufactured to ASTM D1998 specification for upright polyethylene storage. UV stabilizers are co-extruded into the resin for outdoor installation. Maximum operating temperature 120°F for HDPE; higher for XLPE (cross-linked polyethylene). NSF 61 certified models available on request for potable drinking water applications — call to specify.
Freight & Delivery
Tanks ship LTL motor freight from the closest stocking warehouse to your delivery ZIP. Typical transit 5-10 business days. Liftgate available at delivery (per-shipment fee). Always inspect at delivery and note any damage on the bill of lading before signing — that is the LTL carrier claim trigger. Bulk-order consolidation reduces per-tank freight 25-40%. Same-business-day quotes: call 866-418-1777 with MPN, quantity, and delivery ZIP.
Sizing & Selection
Pick capacity first, then verify dimensions against your installation footprint. Most rotomolded tanks are built to OEM standard dimensions ± standard rotational-molding tolerance of ±2-3%. Vertical tanks need flat-pad foundation; horizontal/leg tanks need stand or cradle (check listing — some are sold with integrated stand, others require separate stand or band purchase). Application engineering: call 866-418-1777 for sizing, layout, and accessory recommendations.
11000 gallons, a 22 inch manway and an Alabama lane
Part 44023 prints 11000 gallons in a 144 inch diameter shell 167 inches tall, 1894 lb empty and 1894 lb to ship, a 2 inch polypropylene female NPT...
The 1.5 rated slim 6,000, 1,650 pounds empty
Where the floor plan is full and the liquid is not dense, the Snyder 7430000N46 is the buy: 6,000 gallons in a 102 inch circle 188 inches tall, 1,650...
6,000 gallons that clear a twelve foot one inch roof line, rated 1.9
Twelve feet one inch is the number that sells the Snyder 7140300N48. It holds 6,000 gallons on a 120 inch base at 145 inches...
The narrow 6,000 at the 1.5 rating, 1,650 pounds empty
Where the floor plan is full and the liquid is not dense, this is the buy. The Snyder 7430000N40 holds 6,000 gallons in a 102 inch circle...
6,000 gallons rated 1.9, twelve feet one inch to the lid
The Snyder 7140300N42 is the heavy-duty grade at 6,000 gallons: a 120 inch circle standing 145 inches tall, 1,500 pounds empty, molded in...
Seven thousand four hundred gallons rated one and a half
Part number SII-5320100N49 is a 7400 gallon cone bottom tank listed at 160 inches tall with the diameter given as 142 inches, at 1600 pounds...
6,200 gallons behind a 1.9 wall, 1,678 pounds of it
Three part families share the Snyder 8220000 shell and this is the heavy one. The 8220000N51 holds 6,200 gallons at 120 inches across and 140...
6,200 gallons at 1.9 specific gravity under twelve feet
The Snyder 8220000N45 is a white polyethylene vertical liquid storage tank, 120 inches across and 140 inches tall, holding 6,200 gallons at...
Ten thousand gallons in a hundred and forty-one inch circle
This is the largest tank on this page's sheet. Norwesco's N-44103 holds 10,000 gallons and is listed 141 inches long, 141 inches wide and...
Norwesco 10,000 Gallon Vertical Liquid Storage Tank in White (N-45400)
N-45400 is a 10000 gallon vertical liquid storage tank in white high density linear polyethylene, 140 inches across and 160...
10,500 gallons of green water storage on a twelve foot base
The Snyder WG101 is a green polyethylene water tank that holds 10,500 gallons in a shell 142 inches across and 170 inches tall, weighing...
10,500 gallons on a 142 inch footprint, the largest Snyder water tank that still ships as class 300
The WB101 is Snyder's 10,500 gallon vertical water tank: 142 inches across, 170 inches tall, black...