1,000 gallons on a 60 inch base with a 2 inch outlet
The Snyder 32677 is a white high density linear polyethylene vertical liquid storage tank, 60 inches across and 89 inches tall, holding 1,000 gallons at 174 pounds. Its wall is rated for a specific gravity of 1.5, or 12,510 pounds of contents against 8,340 for water, so it holds brine, fertilizer solution and coagulant as delivered as well as water, it comes with a 2 inch polypropylene female NPT bulkhead fitting already in the wall, and it is the lightest 1,000 gallon tank Snyder makes on this base. An 18 inch threaded, vented manway on top, and it ships as standard LTL freight.
Buying for a site, a fleet or a district? Request a written quote with freight to your ZIP, or add it to your cart above and call 866-418-1777 with any question on the fit.
Four totes, the light way
A thousand gallons is four totes with room for expansion and freeboard, and a 60 inch base under 89 inches stands under a standard eave with the manway reached from a step. A water-rated wall is for water and nothing heavier; the chemical-grade wall is for concentrated acid; a 1.5 wall is the middle, sized for brine, fertilizer solution and coagulant as delivered and every water application, with margin, at less resin than the heavier grades in the same shell. The 2 inch fitting already in the wall means a valve threads in and the tank goes to work the day it lands. Full, it puts 12,510 pounds on a 60 inch circle at the rating, which a slab in full contact or a compacted, screeded gravel pad carries; strap it to a wall or a post where wind or carts can reach it. The 1,000 gallon vertical tank buyers guide sets the makers' shapes at this volume side by side; the tank sizing calculator tells you whether 1,000 gallons covers the draw, and the tank sizing guide covers days of supply.
Grades on the 60 x 89 inch tank, and the sizes beside it
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 32677 (this tank, 1.5 SG, 2 inch fitting) | 1,000 | 60 x 89 in | 174 lb |
| 1831000C34 | 1,000 | 60 x 89 in | 260 lb |
| 1831000N40 (XLPE) | 1,000 | 60 x 89 in | 260 lb |
| 1831000N42 (XLPE, heavy wall) | 1,000 | 60 x 89 in | 300 lb |
| 1830200N43 (1.5 SG, ASTM certified) | 1,200 | 60 x 109 in | 310 lb |
| 1810000C34 (doorway) | 850 | 48 x 117 in | 210 lb |
| 8120000C26 (low profile, 2 inch fitting) | 1,100 | 86 x 55 in | 210 lb |
| 1710000C26 (low profile) | 1,100 | 86 x 55 in | 160 lb |
The 1831000 tanks are the heavier grades in this same shell, the C34 general, the N40 cross-linked for oxidizers and the N42 the heavy cross-linked wall. The 1830200N43 is the certified 1,200 on this base 20 inches taller; the 1810000C34 stands 850 gallons on a 48 inch base that rolls through a door, and the 8120000C26 and 1710000C26 lay 1,100 gallons down under 55 inches on an 86 inch base.
Comparing against another maker? Send the competing spec to 866-418-1777 or a quote request and we will show the differences honestly.
Ports
- Outlet: 2 inch polypropylene female NPT bulkhead fitting, installed; thread in a valve, run a flexible connector to hard pipe, and support the valve off the pad.
- Access: 18 inch threaded, vented manway, 89 inches up; filled by hose, tote pump or truck through a dip tube, vented outside on anything that fumes.
- Service limit: 120 F / 48 C.
Polypropylene is the fitting for water, brine and most treatment chemicals; check the liquid at its concentration against the fitting as well as the wall before the first fill. The white wall shows the level in daylight; a low-level float switch keeps a pump from running dry. Put the pump below the outlet, where it primes itself, close the manway against vapor loss, and keep a light-sensitive liquid out of direct sun. In a freezing climate insulate or drain the outlet valve and the first run of pipe; the body takes ice from the top down without harm.
Where you will find one
Well storage for a house and a garden, a rain cistern under a large roof, brine for a softener bank, fertilizer concentrate at a farm, treatment chemicals at a small plant, and one cell of a small fire reserve of the kind the fire-water reservoir design guide describes. One liquid per tank, labeled.
Shipping the tank
The 32677 ships palletized as LTL freight (NMFC 156600-01) at a class rate; the freight cost estimator shows it for your ZIP, and the listed price is before freight. Two people stand 174 pounds; at 60 inches across it needs a wide door or goes outside. Fill it to the manway once, hold it, and check the fitting for a weep before the pump goes on. Save the pallet; a tank that ever has to move again is easier to move on it.
Freight and documents
Ships from: Merced, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 32677.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
