15,000 gallons at 1.5 specific gravity on a twelve foot base
The Snyder 5370000C37 is a high density linear polyethylene vertical liquid storage tank, 142 inches across and 234 inches tall, holding 15,000 gallons at 4,400 pounds. Its wall is rated for a specific gravity of 1.5, or 187,650 pounds of contents against 125,100 for water, so it holds brine, fertilizer solution and coagulant as delivered as well as water, at three tanker loads on a twelve foot pad. An 18 inch threaded, vented manway on top, a 3 year warranty, and it ships as oversize freight.
Buying for a site, a fleet or a district? Request a written quote with freight to your ZIP, or add it to your cart above and call 866-418-1777 with any question on the fit.
Sixty-two tons of water on a twelve foot circle
Full of water, the 5370000C37 puts 125,100 pounds on a 142 inch circle, and a rotationally molded floor bears on the whole pad, so the pad is what matters: an engineered slab bearing under every inch of the floor, per the concrete pad sizing guide, screeded flat, with no pipe trench or drain crossing under it. An empty tank gets strapped, because 234 inches of empty polyethylene is a sail, and the straps go slack once it is full. The 15,000 gallon vertical tank buyers guide walks through the competing shapes at this volume; the tank sizing calculator tells you whether 15,000 gallons covers the draw, and the tank sizing guide covers days of supply.
Grades on the 142 x 234 inch tank, and the sizes beside it
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 5370000C37 (this tank, 1.5 SG) | 15,000 | 142 x 234 in | 4,400 lb |
| 5370000C34 | 15,000 | 142 x 234 in | 4,400 lb |
| 5370000N43 (1.5 SG, ASTM certified) | 15,000 | 143 x 234 in | 4,400 lb |
| 5370000C26 (1.9 SG) | 15,000 | 142 x 234 in | 4,400 lb |
| 3030100C26 (wide) | 15,000 | 165 x 184 in | 4,400 lb |
| 5350000C34 | 12,500 | 142 x 198 in | 3,100 lb |
| 5380000C126 | 16,500 | 142 x 257 in | 3,000 lb |
The C34 is the general-grade tank in this shell, the N43 is this same 1.5 wall with ASTM certification for a job that needs the paper, and the C26 is the 1.9 chemical wall, all at the same weight. The 3030100C26 holds the same 15,000 gallons on a 165 inch base 50 inches shorter, the 5350000C34 is the 12,500 gallon step down 36 inches shorter, and the 5380000C126 is the 16,500 gallon step up at 257 inches.
Comparing against another maker? Send the competing spec to 866-418-1777 or a quote request and we will show the differences honestly.
Where the pipe goes
- Outlet: specify the bulkhead fitting for the liquid when ordering; a flexible connector at the bulkhead, an expansion joint in the run, and a valve on its own support off the slab. Order a large outlet if the tank is a fire reserve.
- Access: 18 inch threaded, vented manway, 234 inches up, reached from a fixed platform with a rail.
- Service limit: 120 F / 48 C.
A tank this big breathes hard as it fills, empties and warms, so size the vent to the pump-out and fill rates, screen it, and do not rely on the manway default. Fit a sender read at ground level so nobody climbs for a number. In a cold climate the outlet valve and the first run of pipe are insulated or drained; at this volume the body freezes slowly and from the top down.
The work it does
Community water storage, a fire reserve of the kind the fire-water reservoir design guide describes, irrigation storage on a large property, brine, fertilizer solution or coagulant as delivered at the 1.5 rating, and the storage stage of a reuse system for roof water and condensate, per the industrial water reuse tank topology article. One liquid per tank, labeled.
Freight, in plain terms
At 142 inches across and 234 inches long on the deck the 5370000C37 is oversize freight (NMFC 156600) on a flatbed at a lane rate, with an escort on most routes; the freight cost estimator prices the lane to your ZIP; the figure listed here is before freight. A crane sets 4,400 pounds upright on the slab. Fill it to the manway once, hold it, check the outlet fitting, and keep a screen on the vent. Save the pallet; a tank that ever has to move again is easier to move on it.
Freight and documents
Ships from: Lincoln, NE. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 5370000C37.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.