A 3,000 gallon crosslinked polyethylene tank you can manage from the floor
The Snyder Industries 3000 Gallon ASTM XLPE Vertical Storage Tank, part number 7410000N40, is a natural white crosslinked linear polyethylene tank 102 inches in diameter and 96 inches tall, weighing 575 lb empty. It is the standard wall of the low 7410000 shell, rated for liquids up to 1.5 specific gravity: 3,000 gallons of water weighs 25,020 lb (3,000 x 8.34), and a 1.5 liquid at the same level weighs 37,530 lb. The top carries an 18 inch threaded vented manway. Snyder puts the service limit at 140 F, and backs it with a 3 year warranty. Natural white shows the liquid line through the wall, so a glance from the door tells you what is left.
Need it under a low roof? Call 866-418-1777 with the liquid and the room, or get freight to your ZIP and add it to your cart above.
Where it goes
At 96 inches tall the manway is reached from a step, not a ladder, which is why pools, small water systems and packing houses put this shell in a chemical room for hypochlorite, sanitizer or a thin process chemical, and why it works as a water tank under an existing roof. Full of water it puts 25,020 lb on a 102 inch circle, and a rotationally moulded floor bears on all of it, so the slab is poured level and in full contact; our concrete pad sizing guide covers the design. Keep light-sensitive liquids indoors or in shade, because the wall is translucent. Check 3,000 gallons against your draw and delivery interval with the tank sizing calculator and the tank sizing guide. Where a second wall is required, the Captor double wall freeboard guide shows what containment costs in usable volume; where the tank sits in a reuse train, the industrial water reuse tank topology article shows where a low 3,000 fits; and for a fire reserve, read the fire water reservoir guide first.
What to check before you buy
- The liquid. Up to 1.5 specific gravity and 140 F in this tank. Check it in the chemical compatibility guide; for a denser liquid, ask us about the heavy duty wall of the same shell.
- The outlet. Tell us the liquid and the pipe size you are connecting and we confirm the fitting that goes in the wall. Mount the pump low so the suction stays flooded, put the first valve on its own support, and connect to hard pipe through a flexible connector.
- The manway. An 18 inch threaded vented manway, 96 inches up. Fill through a dip tube to the floor, keep the lid shut between deliveries, and run the vent outdoors on a liquid that fumes. A Snyder drawing for the 7410000 shell is linked under Technical Drawing on this page.
Sizes nearby
The same 3,000 gallons on a slimmer, taller shell: the 3000 gallon black tank, the 3000 gallon black heavy duty tank and the 3000 gallon 1.35 SG black tank. A little smaller on nearly the same footprint: the 2650 gallon heavy duty tank. In white, one step up: the 3500 gallon white vertical tank.
Shipping and receiving
The 7410000N40 ships LTL at freight class 400 from the nearest of Snyder's plants in Chowchilla, CA, Lincoln, NE and Philippi, WV, strapped to a skid at 102 by 102 by 96 inches and 575 lb. A tank this wide is an oversize load, so if the estimator hands you to the phone, call us with the ZIP. Measure the door and the route to the room before the truck comes. A forklift sets it with straps under the body, never through the manway. Check the part number 7410000N40 on the bill of lading, look over the shell for transit damage, and fill it with water first, holding it a day while you watch the pad edge and the outlet fitting, before anything else goes in.
Ready to order? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
Freight and documents
Ships from: Chowchilla, CA; Lincoln, NE; Philippi, WV. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 7410000N40.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.