The Storage catalog at OneSource Plastics includes every active manufacturer SKU across Norwesco, Snyder Industries, Chem-Tainer, Enduraplas, and Bushman — rotomolded polyethylene tanks. Certifications such as ASTM D1998 construction and FDA 21 CFR 177.1520 food-contact resin compliance vary by model and manufacturer, so check each product's Specifications for what applies to that tank. Use the sort and filter controls below to narrow by capacity, brand, or dimensions.
Applications
Water storage — potable, irrigation, fire suppression, livestock
Industrial process holding, batch mixing, and dosing
Agricultural — fertilizer, herbicide, water hauling, livestock watering
Compliance & Standards
All polyethylene tanks in this category are rotomolded from FDA 21 CFR 177.1520 compliant resin and manufactured to ASTM D1998 specification for upright polyethylene storage. UV stabilizers are co-extruded into the resin for outdoor installation. Maximum operating temperature 120°F for HDPE; higher for XLPE (cross-linked polyethylene). NSF 61 certified models available on request for potable drinking water applications — call to specify.
Freight & Delivery
Tanks ship LTL motor freight from the closest stocking warehouse to your delivery ZIP. Typical transit 5-10 business days. Liftgate available at delivery (per-shipment fee). Always inspect at delivery and note any damage on the bill of lading before signing — that is the LTL carrier claim trigger. Bulk-order consolidation reduces per-tank freight 25-40%. Same-business-day quotes: call 866-418-1777 with MPN, quantity, and delivery ZIP.
Sizing & Selection
Pick capacity first, then verify dimensions against your installation footprint. Most rotomolded tanks are built to OEM standard dimensions ± standard rotational-molding tolerance of ±2-3%. Vertical tanks need flat-pad foundation; horizontal/leg tanks need stand or cradle (check listing — some are sold with integrated stand, others require separate stand or band purchase). Application engineering: call 866-418-1777 for sizing, layout, and accessory recommendations.
The Chem-Tainer 2100 gallon vertical liquid storage tank is an HDPE storage tank built for high-volume water and liquid holding where you need real capacity in a compact 87-inch square footprint...
The Chem-Tainer 2800 gallon vertical liquid storage tank is a polyethylene workhorse engineered around a 1.5 specific gravity rating, which means the resin wall is built to carry contents heavier...
850 gallons of sulfuric acid storage through a doorway
The Snyder 1810200N30 is a white polyethylene vertical liquid storage tank, 48 inches across and 114 inches tall, holding 850 gallons at 220...
3000 gallons rated 1.5 on its own sheet, with the limit in print
The Snyder SII-7410000C37 is the wide 3000 whose sheet puts its numbers on paper: a specific gravity rating of 1.5, a service limit...
The 3,000 gallon black tank molded at all three Snyder plants
Snyder molds the 7410000C37-BLACK at Chowchilla, California, Lincoln, Nebraska and Philippi, West Virginia, and the order ships from...
2,650 gallons in black under an eight foot roof line, from Marked Tree
Out of Marked Tree, Arkansas comes the Snyder 8390000C37-BLACK, a 2,650 gallon black polyethylene vertical tank 102 inches...
2,650 gallons in white, the general-grade wall at 1.5 specific gravity
Water and the lighter chemicals do not need the heaviest wall, and the Snyder 8390000C37 is the 2,650 that skips it: natural...
2,500 gallons at 1.35 specific gravity on a 96 inch base, ASTM certified
The Snyder 5090300N39 is a white polyethylene vertical liquid storage tank, 96 inches across and 98 inches tall, holding...
Fifteen hundred gallons kept under forty-four inches tall
The Norwesco N-41392 holds 1500 gallons in a low profile shell the sheet gives as 130 inches long, 81 inches wide and 44 inches tall, with...
2,500 gallons at 1.35 specific gravity under nine feet
The Snyder 8140000N39 is a white high density linear polyethylene vertical liquid storage tank, 90 inches across and 107 inches tall, holding...
2,500 gallons at 400 pounds, the lightest wall in the molding
The Snyder 5090300N33 is the light wall in the wide 2,500: 2,500 gallons of black polyethylene storage 96 inches across and 98 inches...
2,500 gallons at 427 pounds in the 1.35 wall
Most tanks in this family are listed at a round empty weight. The Snyder 8140000N33 is listed at 427 pounds, and that is what the sheet gives, so that is...