-
Norwesco
SKU: N-43533
Norwesco Florida Only 1050 Gallon Two Compartment Low Profile Septic Tank - IAPMO Certified
$1,750.34 -
Norwesco
SKU: N-44497
1000 Gallon Two Compartment Septic Tank with Gaskets and Tees for Canada
$1,982.49 -
Norwesco
SKU: N-44510
Norwesco 750 Gallon Low Profile Two Compartment Septic Tank IAPMO Certified with Loose Plumbing
$1,990.40 -
Norwesco
SKU: N-43495
Norwesco 750 Gallon Plastic One Compartment Septic Tank with Loose Plumbing and Low Profile Design - IAPMO Certified
$2,000.39 -
Norwesco
SKU: N-41814
Norwesco 750 Gallon Plastic One Compartment Septic Tank - IAPMO Certified
$2,000.39 -
Norwesco
SKU: N-44498
1000 Gallon Two Compartment Bruiser Multi-Use Underground Tank with Gaskets and Tees for Canada
$2,008.05 -
Norwesco
SKU: N-42405
Norwesco 1000 Gallon One Compartment Septic Tank with Loose Plumbing and Low Profile Design - IAPMO Certified
$2,100.41 -
Norwesco
SKU: N-43538
Norwesco 1000 Gallon Plastic One Compartment Septic Tank with Loose Plumbing and Low Profile Design - IAPMO Certified
$2,100.41 -
Norwesco
SKU: N-40197
Norwesco 1000 Gallon Plastic One Compartment Septic Tank with Loose Plumbing, Low Profile Design and Side Inlet
$2,100.41 -
Norwesco
SKU: N-43499
Norwesco 750 Gallon Plastic Two Compartment Septic Tank with Loose Plumbing and Low Profile Design - IAPMO Certified
$2,100.41 -
Norwesco
SKU: N-43520
Norwesco 750 Gallon Preplumbed One Compartment Septic Tank with Low Profile Design - IAPMO Certified
$2,100.41 -
Norwesco
SKU: N-43532
Norwesco Florida Only 1250 Gallon Two Compartment Low Profile Septic Tank - IAPMO Certified
$2,100.41
Plastic Septic Tanks
Plastic Septic Tanks — Comprehensive Catalog
The Plastic Septic Tanks catalog at OneSource Plastics includes every active manufacturer SKU across Norwesco, Snyder Industries, Chem-Tainer, Enduraplas, and Bushman — rotomolded polyethylene tanks. Certifications such as ASTM D1998 construction and FDA 21 CFR 177.1520 food-contact resin compliance vary by model and manufacturer, so check each product's Specifications for what applies to that tank. Use the sort and filter controls below to narrow by capacity, brand, or dimensions.
Applications
- Residential and small-commercial septic systems (single- and dual-compartment)
- Low-profile installation under driveways or high water tables (10"-18" cover)
- Holding-tank applications where municipal sewer is unavailable
- Aerobic treatment systems (ATU) and pump chambers
Compliance & Standards
All polyethylene tanks in this category are rotomolded from FDA 21 CFR 177.1520 compliant resin and manufactured to ASTM D1998 specification for upright polyethylene storage. UV stabilizers are co-extruded into the resin for outdoor installation. Maximum operating temperature 120°F for HDPE; higher for XLPE (cross-linked polyethylene). NSF 61 certified models available on request for potable drinking water applications — call to specify.
Freight & Delivery
Tanks ship LTL motor freight from the closest stocking warehouse to your delivery ZIP. Typical transit 5-10 business days. Liftgate available at delivery (per-shipment fee). Always inspect at delivery and note any damage on the bill of lading before signing — that is the LTL carrier claim trigger. Bulk-order consolidation reduces per-tank freight 25-40%. Same-business-day quotes: call 866-418-1777 with MPN, quantity, and delivery ZIP.
Sizing & Selection
Pick capacity first, then verify dimensions against your installation footprint. Most rotomolded tanks are built to OEM standard dimensions ± standard rotational-molding tolerance of ±2-3%. Vertical tanks need flat-pad foundation; horizontal/leg tanks need stand or cradle (check listing — some are sold with integrated stand, others require separate stand or band purchase). Application engineering: call 866-418-1777 for sizing, layout, and accessory recommendations.